Search
SOUTHCO
Inject / Eject Mechanism
P7
Designed to secure electronics modules that are larger and heavier than just a line card or printed circuit board, these mechanisms insert and eject modules with one simple motion. They are even available in a tool-secured style to meet industry standards for restricted access.
- No tools required for installation – mechanism attaches to outer panel or door quickly and easily with a clip-on retainer
- Available in three different sizes to accommodate panels from 0.9 mm to 3.2 mm thick
- Available in tool-secured and non-secured styles
- Tool-secured style features a maximum recommended holding load greater than 400 N at an ambient temperature of 20ºC
- These mechanisms are rated for more than 200 insertion / extraction cycles of a 300 N load at an ambient temperature of 25ºC
| Part No. | Series | Type | Panel Thickness | CAD | Quantity | |
| P7-1-301-15 | Handle | Non Tool Secured | 0.9 - 1.6 | Download |
|
|
| P7-1-301-25 | Handle | Non Tool Secured | 1.7 - 2.4 | Download |
|
|
| P7-1-301-35 | Handle | Non Tool Secured | 2.5 - 3.2 | Download |
|
|
| P7-1-302-15 | Handle | Tool Secured | 0.9 - 1.6 | Download |
|
|
| P7-1-302-25 | Handle | Tool Secured | 1.7 - 2.4 | Download |
|
|
| P7-1-302-35 | Handle | Tool Secured | 2.5 - 3.2 | Download |
|
|
| P7-1-303-15 | Handle | Secondary Catch | 0.9 - 1.6 | Download |
|
|
| P7-1-303-25 | Handle | Secondary Catch | 1.7 - 2.4 | Download |
|
|
| P7-1-303-35 | Handle | Secondary Catch | 2.5 - 3.2 | Download |
|
|
| P7-99-103-53 | Flush | - | - | Request |
|
